High-Barrier materials
High-Barrier PVC and Coated Films
A barrier requirement is usually a number, not a material name: a target WVTR at a stated thickness and test condition. High-barrier PVC and PVDC-coated grades are selected against that number, then checked on the forming line.
Coating weight, base film gauge and seal lacquer interact. We quote them together so the seal window you validate in the trial is the one that runs in production.
- WVTR reported per batch
- Coating weight control
- Forming and seal window supplied
- Grade matched to shelf-life target
Showing 2 of 16 materials
Filter by category
Filter by application

High-Barrier PVC Films
Advanced moisture and oxygen barrier for extended shelf life

Tropical Aluminum
Ultra-high barrier aluminum laminate for tropical and high-humidity pharmaceutical markets
High-Barrier: questions buyers ask
When is PVDC-coated PVC worth the extra cost?
When the product's moisture sensitivity needs a shelf life that standard PVC cannot hold and the pack format is already fixed. The coating lowers moisture transmission at the same gauge; the trade-off is coating weight control, sealing behaviour and a weaker recycling position.
How is barrier performance verified?
WVTR is tested on the finished film at an agreed thickness and condition, with results reported per batch. For coated grades the coating weight is checked as well, because barrier tracks coating weight more closely than base gauge.
Does a coated film change our forming parameters?
It can: coating and lacquer affect heat transfer during forming and sealing. We supply a suggested forming and seal window with the trial roll, then adjust it with your line data before the production order is released.
Which materials do you supply for pharmaceutical packaging?
We produce blister PVC and high-barrier PVC, APET and RPET rigid film, PVC/APET laminated sheet, cold-form aluminium, PTP aluminium foil, tropical foil, metallized barrier film, composite laminated film and HDPE, PET and PP bottles for oral solids and liquids.
Can you match a film or foil specification we already use?
Yes. Send the existing datasheet, gauge, width and forming depth and we will confirm whether the structure can be matched, and which parameters such as slip, seal window or coating weight need to be agreed before a trial run.
What compliance documentation is issued with an order?
Orders are produced under ISO 15378 and GMP with a batch certificate of analysis, a compliance statement covering USP <661> and EP 3.1/3.2 where applicable, and material datasheets. Additional declarations can be added to the specification for a specific market submission.
Do you supply recycled-content or PVC-free options?
Yes. RPET rigid film carries declared post-consumer content with certificates, and mono-PET or polyolefin structures are available where the product's moisture sensitivity allows. Our engineers will confirm which option fits your barrier requirement.
Related reading
Material Guides Behind the Specification
The comparisons buyers ask for most often, written by the engineers who run the film and foil lines.
- Alu-alu vs PVC/PVDC blister: choosing a barrier formatBarrier data, tooling, cavitation and the specification items that change with the format.
- PVC-free and recycled-content claims: what the paperwork has to showThe evidence behind each common claim, and where claims tend to outrun it.
- Blister seal strength testing: peel, burst and which limit to write downTest methods, sampling positions and the clauses that keep batch results comparable.
- PTP aluminium foil pinholes: causes, detection and specificationsWhere pinholes come from and how to set an acceptance limit per unit area.
- Strip packaging vs blister for unit-dose solidsA selection checklist covering barrier, machine fit, geometry and documentation.
- Metallized barrier film vs PVDC-coated PVCHow the two barrier routes differ on moisture, oxygen, print and recyclability.
Need a custom specification? Contact us for tailored solutions.
Contact Us