Cold-Form materials
Cold-Form PVC and Alu-Alu Materials
Cold-form materials are specified where a thermoformed blister cannot hold the barrier. Cold-form PVC gives a cost-controlled base for cold-seal formats; PVC-free cold forming aluminum is drawn at room temperature and delivers a near-total moisture and light barrier.
Both routes are quoted against the same inputs: cavity layout, forming depth, line speed and the product's moisture sensitivity. Send those four and we confirm gauge, temper and sealing window before samples are made.
- PVC-free alu-alu laminate
- Cold-form PVC sheet
- Forming depth and gauge review
- Trial rolls before production
Showing 2 of 16 materials
Filter by category
Filter by application

Cold-Form PVC Sheets
High formability for cold-seal blister packaging applications

Cold Forming Aluminum Without PVC
Eco-friendly PVC-free cold forming laminate for sustainable pharmaceutical packaging
Cold-Form: questions buyers ask
What is the difference between cold-form PVC and cold forming aluminum?
Cold-form PVC is a thermoformable sheet used with a lidding foil for standard barrier needs at lower material cost. Cold forming aluminum is an alu-alu laminate drawn at room temperature that gives near-total moisture and light barrier without PVC, with different tooling, forming pressure and seal settings.
Can alu-alu run on our existing blister machine?
In most cases yes, with parameter changes: forming pressure, dwell time and seal temperature differ from PVC, and the forming station has to be set for the laminate. Share the machine make, cavity layout and target output and we confirm the gauge and temper that suits it.
What documentation comes with a cold-form order?
Each batch ships with a certificate of analysis, a material datasheet and an ISO 15378 statement, plus a USP <661> or EP 3.1/3.2 compliance statement where the market requires it. Trial quantities start at 1,000 kg per specification.
Which materials do you supply for pharmaceutical packaging?
We produce blister PVC and high-barrier PVC, APET and RPET rigid film, PVC/APET laminated sheet, cold-form aluminium, PTP aluminium foil, tropical foil, metallized barrier film, composite laminated film and HDPE, PET and PP bottles for oral solids and liquids.
Can you match a film or foil specification we already use?
Yes. Send the existing datasheet, gauge, width and forming depth and we will confirm whether the structure can be matched, and which parameters such as slip, seal window or coating weight need to be agreed before a trial run.
What compliance documentation is issued with an order?
Orders are produced under ISO 15378 and GMP with a batch certificate of analysis, a compliance statement covering USP <661> and EP 3.1/3.2 where applicable, and material datasheets. Additional declarations can be added to the specification for a specific market submission.
Do you supply recycled-content or PVC-free options?
Yes. RPET rigid film carries declared post-consumer content with certificates, and mono-PET or polyolefin structures are available where the product's moisture sensitivity allows. Our engineers will confirm which option fits your barrier requirement.
Related reading
Material Guides Behind the Specification
The comparisons buyers ask for most often, written by the engineers who run the film and foil lines.
- Alu-alu vs PVC/PVDC blister: choosing a barrier formatBarrier data, tooling, cavitation and the specification items that change with the format.
- PVC-free and recycled-content claims: what the paperwork has to showThe evidence behind each common claim, and where claims tend to outrun it.
- Blister seal strength testing: peel, burst and which limit to write downTest methods, sampling positions and the clauses that keep batch results comparable.
- PTP aluminium foil pinholes: causes, detection and specificationsWhere pinholes come from and how to set an acceptance limit per unit area.
- Strip packaging vs blister for unit-dose solidsA selection checklist covering barrier, machine fit, geometry and documentation.
- Metallized barrier film vs PVDC-coated PVCHow the two barrier routes differ on moisture, oxygen, print and recyclability.
Need a custom specification? Contact us for tailored solutions.
Contact Us