Gmp
GreenMedical Packing

Flexible Packaging materials

Flexible Packaging Films and Laminates

A flexible structure is a stack of jobs: print carrier, barrier and sealant. Getting the order and thickness of those layers right is what a laminate specification does.

Metallized PET or CPP often replaces foil where the barrier target allows it, at lower cost and weight. Whether it can depends on the WVTR and light requirement, so both options are quoted side by side.

  • Structures built per product and format
  • Metallized or foil barrier layers
  • Print registration approved on proof
  • Seal strength checked on the laminate

Showing 2 of 16 materials

Filter by category

Filter by application

Product catalogue results
Composite Laminated Film packaging material
Flexible Packaging

Composite Laminated Film

Multi-layer laminated films for sachets, strip packs and single-serve formats

EU 10/2011 (by structure)YBB (by structure)Food-contact requirements on request
Typical Structures: PET/AL/PE, PET/VMPET/PE, BOPP/VMCPP, PET/PE
Layer Functions: Print layer, barrier layer, heat seal layer
View Details
Metallized Barrier Film packaging material
Flexible Packaging

Metallized Barrier Film

Vacuum metallized PET and CPP films for light and UV barrier

EU 10/2011 (by structure)Food-contact requirements on request
Types: VMPET (metallized PET), VMCPP (metallized CPP)
Base Film: PET or co-extruded cast polypropylene (CPP)
View Details

Flexible Packaging: questions buyers ask

How is a laminate structure decided?

From the product, the pack format and the barrier target. Print layer, barrier layer and sealant are chosen in that order, then thickness is set so the structure still runs on your form-fill-seal machine.

Metallized film or aluminium foil?

Foil gives the highest barrier and folds well but costs more and can crack at sharp folds. Metallized film is lighter and cheaper, with barrier that is adequate for many nutraceutical and cosmetic packs but lower and more sensitive to flexing.

Can you print the laminate?

Yes, with registration and colour approved on a proof before the production run. Adhesion and seal strength are checked on the finished laminate, not only on the base film.

Which materials do you supply for pharmaceutical packaging?

We produce blister PVC and high-barrier PVC, APET and RPET rigid film, PVC/APET laminated sheet, cold-form aluminium, PTP aluminium foil, tropical foil, metallized barrier film, composite laminated film and HDPE, PET and PP bottles for oral solids and liquids.

Can you match a film or foil specification we already use?

Yes. Send the existing datasheet, gauge, width and forming depth and we will confirm whether the structure can be matched, and which parameters such as slip, seal window or coating weight need to be agreed before a trial run.

What compliance documentation is issued with an order?

Orders are produced under ISO 15378 and GMP with a batch certificate of analysis, a compliance statement covering USP <661> and EP 3.1/3.2 where applicable, and material datasheets. Additional declarations can be added to the specification for a specific market submission.

Do you supply recycled-content or PVC-free options?

Yes. RPET rigid film carries declared post-consumer content with certificates, and mono-PET or polyolefin structures are available where the product's moisture sensitivity allows. Our engineers will confirm which option fits your barrier requirement.

Need a custom specification? Contact us for tailored solutions.

Contact Us