Gmp
GreenMedical Packing
Back to Products
RPET Rigid Film packaging material
Rigid Film

RPET Rigid Film

RPET rigid film is produced with post-consumer recycled PET and retains the clarity, stiffness and thermoforming behaviour expected of PET. Recycled content is declared and verified per batch, supporting sustainability targets without sacrificing formability. It is suited to consumer healthcare packaging, cosmetic and food-contact trays, and display formats where a lower environmental footprint is a stated requirement.

Compliance Standards

FDA 21 CFR 177.1630EU 10/2011YBB

Applications

  • Sustainable blister packaging
  • Consumer healthcare packaging
  • Cosmetic trays
  • Food-contact trays
  • Retail display packaging
  • Nutraceutical supplements
Request a Quote for This Product

Minimum order is 1,000 kg per specification and quotations follow within 48 hours of a complete specification. The procurement reference lists the documents issued with each delivery.

Technical Specifications

ParameterValue
MaterialRPET (recycled polyethylene terephthalate)
Recycled ContentPost-consumer recycled content, ratio customisable by specification
Thickness Range200μm - 800μm
Width Range150mm - 800mm
Transparency≥85% light transmission
Tensile Strength≥48 MPa
Elongation at Break≥90%
Thermoforming Temperature90-130°C
Forming DepthUp to 18mm
Surface FinishGloss or matte, printable
RecyclabilityMono-material PET (resin code 1), widely recycled
TraceabilityDeclared recycled content verified per batch with documentation
RegulatoryFDA 21 CFR 177.1630, EU 10/2011, YBB

Packaging

Rolls on 76mm (3 inch) cores, stretch-wrapped with edge protection; recycled content documentation supplied with each batch

Minimum Order Quantity

1,000 kg per specification

Questions

Frequently Asked Questions

Common questions about RPET Rigid Film — specifications, usage, and compliance

The post-consumer recycled content ratio is customisable by specification. Higher recycled content reduces virgin material use; clarity and mechanical properties are confirmed against the agreed specification for each order.

The grades we supply are produced to meet FDA 21 CFR 177.1630 and EU 10/2011 requirements for food-contact applications. Compliance statements are provided with each order.

That depends on the dosage form and the stability data. RPET is commonly used for trays and consumer healthcare formats. Where primary pharmaceutical packaging is intended, the material must be qualified against the applicable pharmacopoeial requirements first.

Clarity is slightly lower than virgin APET. The standard specification provides ≥85% light transmission, which is sufficient for most retail and tray applications.

Recycled content is declared on the specification and verified per batch, with supporting documentation provided for customer sustainability reporting and supplier qualification files.

Applications

Application Case Studies

Real-world success stories of RPET Rigid Film across different industries

Consumer Healthcare

Recycled-Content Trays for Consumer Healthcare

A consumer healthcare brand set a packaging target to increase recycled content across its tray formats.

Cosmetics

RPET Packaging for Cosmetic Gift Sets

A cosmetics company wanted gift-set trays made from recycled material without losing shelf appearance.

Retail Pharmacy

Sustainable Display Packaging for Retail Pharmacy

A pharmacy chain requested display packaging with a documented recycled content figure.

Where it is specified

Markets Using RPET Rigid Film

The same material is qualified differently depending on the market, the documentation expected and the climate the pack travels through.

Specification comparison

Compare Rigid Film Materials Side by Side

Key parameters for the materials buyers usually shortlist together. Confirm the final tolerance, gauge range and documentation on the specification sheet before ordering tooling.

MaterialKey specificationsComplianceDatasheet
RPET Rigid FilmThis page
  • Material: RPET (recycled polyethylene terephthalate)
  • Recycled Content: Post-consumer recycled content, ratio customisable by specification
  • Thickness Range: 200μm - 800μm
FDA 21 CFR 177.1630 · EU 10/2011 · YBBViewing now
APET Rigid FilmRigid Film
  • Material: APET (amorphous polyethylene terephthalate)
  • Thickness Range: 200μm - 800μm
  • Width Range: 150mm - 800mm
USP <661> · EP 3.1/3.2 · FDA 21 CFR 177.1630View specs
PVC/APET Laminated Rigid SheetRigid Film
  • Material Structure: PVC/APET laminated rigid sheet
  • Total Thickness: 250μm - 700μm
  • Layer Ratio: PVC/APET layer ratio customisable by specification
USP <661> · EP 3.1/3.2 · YBBView specs

Values are typical ranges from the current datasheet. For a batch certificate or a tolerance outside these ranges, request a written confirmation from our engineers.

Custom programme

Need Custom Specifications?

We offer tailored solutions to meet your specific packaging requirements. Our technical team is ready to help you select the right material, thickness, and compliance standards.