
PVC/APET Laminated Rigid Sheet
PVC/APET laminated rigid sheet bonds a PVC forming layer to an APET surface layer, combining the thermoforming and sealing behaviour of PVC with the gloss, stiffness and print quality of APET. It is used where a high-visibility pack must also form deeply and seal reliably, such as high-clarity blisters, medical device trays and premium cosmetics packaging.
Compliance Standards
Applications
- High-clarity pharmaceutical blisters
- Medical device trays
- Cosmetic packaging
- Electronic component packaging
Minimum order is 1,000 kg per specification and quotations follow within 48 hours of a complete specification. The procurement reference lists the documents issued with each delivery.
Technical Specifications
| Parameter | Value |
|---|---|
| Material Structure | PVC/APET laminated rigid sheet |
| Total Thickness | 250μm - 700μm |
| Layer Ratio | PVC/APET layer ratio customisable by specification |
| Width Range | 150mm - 800mm |
| Transparency | ≥88% light transmission |
| Tensile Strength | ≥45 MPa |
| Elongation at Break | ≥120% |
| Thermoforming Temperature | 110-150°C |
| Forming Depth | Up to 22mm |
| Heat Seal Temperature | 150-210°C (with compatible lidding) |
| Surface Finish | High-gloss APET surface for print and display |
| Sheet Format | Rolls on 76mm (3 inch) cores; cut sheets on request |
| Regulatory | USP <661> Class VI, EP 3.1/3.2, YBB |
Packaging
Rolls on 76mm (3 inch) cores, stretch-wrapped with edge protection and desiccant
Minimum Order Quantity
1,000 kg per specification
Questions
Frequently Asked Questions
Common questions about PVC/APET Laminated Rigid Sheet — specifications, usage, and compliance
The combination uses PVC for reliable deep forming and sealing behaviour while the APET surface provides gloss, stiffness and print quality. Packs that must both form deeply and present well on shelf are the main application.
Sealing is normally against the PVC face, so standard PVC-compatible heat seal lacquers apply. For packs sealed on the APET face, the lidding lacquer must be matched to APET and verified on your line.
Up to 22mm is achievable depending on total thickness and cavity geometry. Deep draws should be confirmed with a line trial before commercial ordering.
Yes. The PVC to APET ratio can be adjusted to trade off forming behaviour, stiffness and surface appearance within the standard total thickness range.
The APET surface accepts flexo and gravure printing and is suitable for solvent, UV and water-based inks subject to print trials on your equipment.
Applications
Application Case Studies
Real-world success stories of PVC/APET Laminated Rigid Sheet across different industries
High-Clarity Blisters for Vitamin Supplements
A supplement brand required a deep-drawn blister with a high-gloss surface for retail presentation.
Stiff Trays for Medical Device Kits
A device manufacturer needed rigid trays that held shape through transport and presented clearly to clinicians.
Display Packaging for Electronic Components
A component supplier required transparent packaging that protected parts and allowed barcode inspection.
Where it is specified
Markets Using PVC/APET Laminated Rigid Sheet
The same material is qualified differently depending on the market, the documentation expected and the climate the pack travels through.
Specification comparison
Compare Rigid Film Materials Side by Side
Key parameters for the materials buyers usually shortlist together. Confirm the final tolerance, gauge range and documentation on the specification sheet before ordering tooling.
| Material | Key specifications | Compliance | Datasheet |
|---|---|---|---|
| PVC/APET Laminated Rigid SheetThis page |
| USP <661> · EP 3.1/3.2 · YBB | Viewing now |
| APET Rigid FilmRigid Film |
| USP <661> · EP 3.1/3.2 · FDA 21 CFR 177.1630 | View specs |
| RPET Rigid FilmRigid Film |
| FDA 21 CFR 177.1630 · EU 10/2011 · YBB | View specs |
Values are typical ranges from the current datasheet. For a batch certificate or a tolerance outside these ranges, request a written confirmation from our engineers.
Related materials
Other Rigid Film Materials
Compare specifications and compliance data for related packaging materials supplied from the same ISO 15378 certified platform.

APET Rigid Film
High-clarity amorphous PET rigid film for thermoformed pharmaceutical and medical packaging

RPET Rigid Film
Recycled-content PET rigid film for sustainable pharmaceutical and consumer packaging

Cold-Form PVC Sheets
High formability for cold-seal blister packaging applications
Further reading
Technical Reading
Related articles on rigid film materials and applications

Post-Approval Changes to Packaging Materials: What Triggers a Filing
Packaging changes often keep the same product name while the filed material no longer matches. How to classify a change, what evidence makes it defensible, and which supplier-side triggers to ask about before the first order.

Recyclable Blister Packaging Under the EU PPWR: What to Specify Now
The EU Packaging and Packaging Waste Regulation pushes blister packs toward design-for-recycling, but recyclability depends on the material stream, the lidding and the collection scheme in each market. This note sets out how PVC, PVC/PVDC, PVC/APET laminates, APET and RPET sit against those requirements, and the specification points worth fixing before tooling and validation.

Choosing Materials for Cosmetic Blisters and Display Trays
A material selection guide for cosmetic and personal care packaging — comparing APET, RPET and PVC/APET laminated sheet for transparent blisters, display trays and inserts, with notes on gloss, scuff resistance and low-MOQ trials.
Custom programme
Need Custom Specifications?
We offer tailored solutions to meet your specific packaging requirements. Our technical team is ready to help you select the right material, thickness, and compliance standards.