Gmp
GreenMedical Packing
Back to Products
APET Rigid Film packaging material
Rigid Film

APET Rigid Film

APET (amorphous polyethylene terephthalate) rigid film offers excellent clarity, good ductility, low temperature sensitivity and easy processing. It thermoforms at lower temperatures than PVC and contains no chlorine, making it a practical choice for medical device trays, diagnostic kit packaging, cosmetic and food-contact trays, and display packaging where transparency matters. Supplied in roll or cut-sheet form, it is printable and compatible with common sealing and sterilization processes.

Compliance Standards

USP <661>EP 3.1/3.2FDA 21 CFR 177.1630EU 10/2011YBB

Applications

  • Pharmaceutical blisters
  • Medical device trays
  • Diagnostic kit packaging
  • Cosmetic packaging
  • Food-contact trays
  • Retail display packaging
  • Nutraceutical supplements
Request a Quote for This Product

Minimum order is 1,000 kg per specification and quotations follow within 48 hours of a complete specification. The procurement reference lists the documents issued with each delivery.

Technical Specifications

ParameterValue
MaterialAPET (amorphous polyethylene terephthalate)
Thickness Range200μm - 800μm
Width Range150mm - 800mm
Transparency≥88% light transmission
Density1.33 - 1.34 g/cm³
Tensile Strength≥50 MPa
Elongation at Break≥100%
Thermoforming Temperature90-130°C
Forming DepthUp to 20mm
Heat Seal Temperature140-200°C (with compatible lidding)
Surface FinishGloss or matte, printable on both sides
RecyclabilityMono-material PET (resin code 1), widely recycled
RegulatoryUSP <661> Class VI, EP 3.1/3.2, FDA 21 CFR 177.1630, EU 10/2011

Packaging

Rolls on 76mm (3 inch) cores, stretch-wrapped with edge protection and desiccant; cut sheets available on request

Minimum Order Quantity

1,000 kg per specification

Selection FAQ

Questions Buyers Ask Before Specifying APET Rigid Film

The decisions that usually come up during qualification: which grade or gauge to choose, when to compare against another structure, and what has to be validated before production.

APET is chlorine-free and suits brands moving away from PVC, while plain PVC offers easier forming and a stronger moisture barrier for the same gauge. Choose on market acceptance and barrier target first, then confirm the forming window on your line, since APET runs at higher temperatures.

It is used in some markets for products where moisture is not the limiting factor. Acceptance varies by regulator and by the stability data behind the pack, so confirm the market position before specification. For tight moisture limits, a coated or aluminium structure is the usual comparison.

Yes. APET forms and seals at higher temperatures than PVC, and the lidding or lacquer has to match the material. Expect to re-validate the seal window and to check the peel appearance, which behaves differently from a PVC blister.

RPET carries verified post-consumer content and comes with documentation per batch, which supports a claim you can defend. The claim itself should follow the rules of the market where the pack is sold, and the recycled content percentage should be stated in the specification rather than in marketing copy alone.

Questions

Frequently Asked Questions

Common questions about APET Rigid Film — specifications, usage, and compliance

APET forms at lower temperatures (90-130°C compared with 120-160°C for PVC) and contains no chlorine. Clarity is comparable, while moisture barrier is lower than PVC, so material selection should follow the stability data for the specific product.

APET is widely used for medical device trays and for blisters where the moisture barrier requirement allows. For highly moisture-sensitive formulations, PVC/PVDC or aluminum-based structures remain the appropriate choice.

APET is compatible with gamma irradiation and ethylene oxide (EtO) sterilization. Autoclave steam sterilization is not recommended because of its relatively low heat deflection temperature.

200μm to 800μm is standard, with custom thicknesses available on request. Thickness tolerance is controlled to ±5% unless a tighter specification is agreed.

1,000 kg per specification is typical. Smaller trial quantities can be discussed for qualification and line-trial purposes.

Applications

Application Case Studies

Real-world success stories of APET Rigid Film across different industries

Diagnostics

Clear Trays for Diagnostic Test Kits

A diagnostic manufacturer needed transparent trays that allowed visual inspection of test components before sealing.

Nutraceuticals

APET Blisters for Nutraceutical Tablets

A nutraceutical producer wanted clearly transparent blisters without chlorine-containing material.

Cosmetics

High-Clarity Display Packaging for Cosmetics

A cosmetics brand required a retail tray that showed the product clearly and printed well for shelf display.

Where it is specified

Markets Using APET Rigid Film

The same material is qualified differently depending on the market, the documentation expected and the climate the pack travels through.

Specification comparison

Compare Rigid Film Materials Side by Side

Key parameters for the materials buyers usually shortlist together. Confirm the final tolerance, gauge range and documentation on the specification sheet before ordering tooling.

MaterialKey specificationsComplianceDatasheet
APET Rigid FilmThis page
  • Material: APET (amorphous polyethylene terephthalate)
  • Thickness Range: 200μm - 800μm
  • Width Range: 150mm - 800mm
USP <661> · EP 3.1/3.2 · FDA 21 CFR 177.1630Viewing now
RPET Rigid FilmRigid Film
  • Material: RPET (recycled polyethylene terephthalate)
  • Recycled Content: Post-consumer recycled content, ratio customisable by specification
  • Thickness Range: 200μm - 800μm
FDA 21 CFR 177.1630 · EU 10/2011 · YBBView specs
PVC/APET Laminated Rigid SheetRigid Film
  • Material Structure: PVC/APET laminated rigid sheet
  • Total Thickness: 250μm - 700μm
  • Layer Ratio: PVC/APET layer ratio customisable by specification
USP <661> · EP 3.1/3.2 · YBBView specs

Values are typical ranges from the current datasheet. For a batch certificate or a tolerance outside these ranges, request a written confirmation from our engineers.

Custom programme

Need Custom Specifications?

We offer tailored solutions to meet your specific packaging requirements. Our technical team is ready to help you select the right material, thickness, and compliance standards.