Insights
Packaging Insights & Regulatory Updates
Material selection notes, regulatory updates and company news for packaging engineers and procurement teams.

Storing Pharmaceutical Films and Foils: Shelf Life, Conditions and Re-Qualification
2026-11-17
A roll that sat in a warm warehouse is not the material that was qualified. Which storage conditions change forming and sealing, how PVC, coated film, foil and laminates age differently, and the triggers that require a stored roll to be re-qualified.

Blister Tooling: Who Specifies It, Who Owns It and What a Change Costs
2026-11-16
Forming, sealing and punching tooling decide which gauge runs, how fast the line can go and what a future pack change costs. What belongs in the tooling specification, who owns the tool, and the five questions to settle before the drawing is released.

Closures and Liners for HDPE Pharmaceutical Bottles: What to Specify
2026-11-12
A bottle is a system: the barrier, the seal and the opening all sit in the closure. This note covers finish standards, liner selection by product, child-resistant options, induction sealing checks and the closure items a specification should pin down.

Writing a Blister Film Specification: What Belongs on the Sheet
2026-11-11
A purchase specification decides how disputes get settled. This note sets out the blocks a blister film specification needs, the test methods to name, the acceptance criteria to agree and the items buyers most often leave out.

Alu-Alu vs PVC/PVDC Blister: Choosing a Barrier Format for Moisture-Sensitive Tablets
2026-11-10
Cold-form alu-alu and thermoformed PVC/PVDC solve the same moisture problem in different ways. This note compares barrier data, line requirements, tooling, cost structure and the specification items that change when a product switches formats.

Packaging Gummies and Softgels: Barrier, Fill Line and Stability
2026-11-07
Gummies and softgels behave differently from tablets on the shelf: they carry more moisture, they stick when the pack lets humidity in, and they are often sold in bottles rather than blisters. This note covers the barrier route for each format, what fill lines need from the container, and which stability questions to settle before packaging is specified.

Blister Seal Strength Testing: Peel, Burst and Which Limit to Write Down
2026-11-06
Every blister specification mentions seal strength, but the number on the sheet is only meaningful with its test method, sample position and acceptance rule. This note compares peel and burst testing, explains when each one answers a different question, and lists the details worth writing into the specification before the first batch runs.

Metallized Barrier Film vs PVDC-Coated PVC: Choosing the Right Barrier
2026-11-05
Metallized film and PVDC-coated PVC both raise barrier above plain PVC, but they raise it in different ways and at different cost points. This note compares the two routes on moisture and oxygen performance, machine behaviour, print and sustainability, so the barrier decision can be made against the product rather than against a datasheet headline.

Strip Packaging vs Blister for Unit-Dose Solids: A Selection Checklist
2026-11-04
Strip packs and blisters both give unit-dose presentation, but they suit different products, machines and markets. This note compares the two formats on barrier, machine fit, pack geometry and documentation, and lists the points worth settling before tooling is ordered.