
Standard Blister PVC
Standard Blister PVC sheets are designed for conventional thermoformed blister packaging. They provide excellent thermoforming performance, high transparency, and consistent surface quality. Suitable for a wide range of solid oral dosage forms including tablets, capsules, and softgel products.
Compliance Standards
Applications
- Tablet blister packs
- Capsule blister packs
- Softgel packaging
- Medical device trays
- Nutraceutical supplements
Minimum order is 1,000 kg per specification and quotations follow within 48 hours of a complete specification. The procurement reference lists the documents issued with each delivery.
Technical Specifications
| Parameter | Value |
|---|---|
| Material | PVC/PVDC, PVC/Alu foil lidding |
| PVC Thickness | 200μm - 750μm |
| PVDC Coating Weight | 40-120 g/m² (single or double side) |
| Width Range | 150mm - 800mm |
| Transparency | ≥90% light transmission (uncoated PVC) |
| Tensile Strength | ≥45 MPa |
| Elongation at Break | ≥150% |
| Thermoforming Temperature | 120-160°C |
| Forming Depth | Up to 25mm |
| Heat Seal Temperature | 160-220°C (with Alu lidding) |
| Seal Strength | ≥8 N/15mm |
| Moisture Barrier (WVTR) | 0.3-1.0 g/m²/24h (PVDC coated) |
| Oxygen Barrier (OTR) | 1-5 cm³/m²/24h (PVDC coated) |
| Roll Core Diameter | 76mm (3 inch) standard |
| Shelf Life | 24-36 months for standard oral solids |
| Material Characteristics | Corrosion resistant, non-flammable, good electrical insulation, oxidation resistant |
Packaging
Standard export carton with PE liner, or as customized
Minimum Order Quantity
500 kg per specification
Selection FAQ
Questions Buyers Ask Before Specifying Standard Blister PVC
The decisions that usually come up during qualification: which grade or gauge to choose, when to compare against another structure, and what has to be validated before production.
Most tablet and capsule blisters run between 250 and 350 micrometres. Pocket depth, cavity size, line speed and the stability data decide the final number: deeper pockets and larger cavities need more material, while thin gauges form faster but leave less margin on the seal flange. Ask for the gauge range on the datasheet and confirm the tolerance, not just the nominal figure.
Move when your stability work shows sensitivity that plain PVC cannot hold. A PVDC-coated web is the usual next step for moderate moisture sensitivity, while cold-form aluminium is selected when the product needs a stronger barrier and light protection. The decision should come from the stability protocol and the destination climate zone rather than from a competitor pack.
Tooling usually stays, because the forming window of standard PVC is well established. Validation does not: a new supplier means new seal strength, peel and line-trial data against your cavity film and machine parameters. Ask for a batch certificate and run a short trial before switching production, even when the gauge is identical.
A certificate of analysis covering gauge, width, tensile and heat-seal relevant properties, plus compliance statements for USP <661> and EP 3.1 where the market requires them, and a migration statement for the intended application. If your regulator expects retained samples, agree the retention period in the specification rather than assuming it.
Questions
Frequently Asked Questions
Common questions about Standard Blister PVC — specifications, usage, and compliance
Standard PVC sheets provide good clarity and formability for general pharmaceutical blister packaging. PVC/PVDC sheets add a polyvinylidene chloride coating that significantly improves moisture and oxygen barrier properties, making them suitable for moisture-sensitive formulations.
We offer PVC sheets from 200μm to 750μm in thickness. The most commonly requested thicknesses are 250μm, 300μm, and 500μm for oral solid dosage forms.
Yes. Our PVC sheets are engineered for consistent thermoforming performance on high-speed blister packaging lines operating at up to 500 cycles per minute, with uniform wall thickness distribution.
Our PVC sheets are compatible with standard aluminum foil lidding (20-45μm), push-through foil, child-resistant foil, and paper/aluminum laminate lidding materials.
Yes. We provide precision slitting to widths from 150mm to 800mm, with tight width tolerances of ±1mm to ensure smooth operation on your blister packaging equipment.
Our standard MOQ is 500 kg per specification. For custom formulations or specialized thicknesses, the MOQ may vary. Please contact our sales team for details.
Applications
Application Case Studies
Real-world success stories of Standard Blister PVC across different industries
Generic Tablet Manufacturing
A generic pharmaceutical manufacturer in Europe needed high-quality PVC blister sheets for their extensive tablet product line.
Over-the-Counter (OTC) Medications
A consumer healthcare company required attractive, high-clarity blister packaging for their OTC pain relief tablets.
Capsule Packaging for Export
A pharmaceutical exporter needed blister packaging for their capsule products destined for multiple international markets.
Hospital Unit-Dose Packaging
A hospital network required unit-dose blister packaging for their medication dispensing system.
Contract Packaging Services
A contract packaging organization (CMO) needed versatile PVC sheets compatible with multiple customer products and packaging equipment.
Where it is specified
Markets Using Standard Blister PVC
The same material is qualified differently depending on the market, the documentation expected and the climate the pack travels through.
Related materials
Other Standard Blister Materials
Compare specifications and compliance data for related packaging materials supplied from the same ISO 15378 certified platform.
Further reading
Technical Reading
Related articles on standard blister materials and applications

How to Choose the Right Blister Packaging Material: A Selection Guide for Pharmaceutical Teams
A practical decision framework for selecting blister packaging materials — from standard PVC to high-barrier Aclar laminates — based on formulation sensitivity, target markets, and regulatory requirements.

Storing Pharmaceutical Films and Foils: Shelf Life, Conditions and Re-Qualification
A roll that sat in a warm warehouse is not the material that was qualified. Which storage conditions change forming and sealing, how PVC, coated film, foil and laminates age differently, and the triggers that require a stored roll to be re-qualified.

Alu-Alu vs PVC/PVDC Blister: Choosing a Barrier Format for Moisture-Sensitive Tablets
Cold-form alu-alu and thermoformed PVC/PVDC solve the same moisture problem in different ways. This note compares barrier data, line requirements, tooling, cost structure and the specification items that change when a product switches formats.
Custom programme
Need Custom Specifications?
We offer tailored solutions to meet your specific packaging requirements. Our technical team is ready to help you select the right material, thickness, and compliance standards.


