Gmp
GreenMedical Packing
Back to NewsIndustry News

Serialization and Track-and-Trace: What It Means for Packaging Materials

By the Green Medical Packing engineering team

Serialization and Track-and-Trace: What It Means for Packaging Materials

Serialization requirements have moved from a novelty to a baseline expectation in most major pharmaceutical markets. For packaging material suppliers, the practical consequence is that materials must reliably support machine-readable codes — not just at the point of printing, but through storage, transport, and dispensing.

Where Mandates Stand

  • United States — the Drug Supply Chain Security Act requires unit-level product identification for most prescription products
  • European Union — the Falsified Medicines Directive requires a unique identifier and tamper-evident feature on most prescription medicines, as covered in our earlier article on EU FMD and packaging standards
  • China — traceability requirements for pharmaceutical products have expanded progressively
  • Other markets — Brazil, India, Turkey, Saudi Arabia, and others operate their own serialization or track-and-trace schemes

The result for manufacturers is that a single product line may need to meet several different coding requirements depending on destination.

Why Substrate Choice Matters

Serialization codes are only useful if they remain readable. Several substrate properties influence that:

  • Surface energy and lacquer compatibility determine whether ink adheres reliably to lidding foil
  • Contrast between the printed code and the background determines scanning reliability
  • Print area availability on the lidding web limits where codes can be applied
  • Coating uniformity affects code quality across the width of a roll

For blisters and strip packs, the lidding foil is usually where serialization data lands. That makes lacquer selection a serialization decision, not just a sealing decision.

Tamper Evidence

The EU Falsified Medicines Directive requires a tamper-evident feature in addition to the unique identifier. For blisters, this is typically achieved through the carton rather than the blister itself, but the packaging material specification still interacts with the tamper-evident design — for example, where a label or seal is applied directly to a film surface.

Practical Steps for Buyers

1. Confirm which serialization and tamper-evidence requirements apply in each destination market 2. Identify where codes will be printed and by which method 3. Verify that the chosen lidding lacquer is compatible with that print method 4. Run a line trial and grade code quality on your own equipment 5. Re-verify readability after accelerated storage representative of the destination climate

Our PTP aluminum foil range supports common serialization print methods, and our team can advise on lacquer selection for your coding setup — contact us to discuss the requirement.

Have questions about this topic?

Send your pack format and target market — our technical team replies within 48 hours.

Ask the technical team